CNC honing machine is suitable for honing and polishing deep hole workpieces, and is suitable for deep hole processing such as hydraulic cylinders, oil pipes, gun barrels, etc. The depth of the machining hole can reach 10 meters. Its machining accuracy can reach IT7 ｏｒ above, and the surface roughness can reach RA0.2 ｏｒ above. The honing head can be used for honing various materials of workpieces by equipping them with corresponding honing stones.
Due to the complexity, precision, and diversity of CNC honing machines, we have placed greater emphasis on their lifespan and maintenance. The service life can be divided into three stages: the new machine running-in period, the normal trial period, and the condition maintenance period. Let's just talk about the new machine running-in period that is easily overlooked by everyone
The maintenance during the running-in period of a new CNC honing machine is easily overlooked. The general running-in period for the maintenance of a new CNC honing machine is about 24 hours. During the running-in period, it ensures the normal operation of the machine, reduces machine failures, and more importantly, prolongs the service life of the CNC honing machine. Some people neglect these processes during the running-in period of new machines in order to make them produce quickly and bring benefits to themselves, and the losses received in the later stages are often greater than these benefits.
The main characteristics of the running-in period include fast wear, poor lubrication, looseness, leakage, and frequent operational errors, all of which can cause varying degrees of damage to the machine.
Maintenance and upkeep during the running-in period. Due to the special nature of the new machine, it is necessary to refer to relevant instructions and materials during the running-in period, fully understand the machine performance, and master certain experience in operating and maintaining the new machine before operating the machine tool. The working ｌｏａｄ of the new machine tool during the running-in period should not be too large. After working for a period of time, the machine should be allowed to rest for a period of time to avoid overheating caused by overloaded operation during the running-in period.
During other periods of operation, it is important to check the usage of various oils in the machine to ensure timely addition of lubricating oil between each movable shaft to prevent wear and tear. At the same time, it is necessary to maintain the cleanliness of the machine tool and adjust and imprison loose components. Adhere to timely cleaning of debris on the machine tool after daily work, cultivate the habit of constantly inspecting and adding lubricating oil, hydraulic oil, coolant, etc. to the machine tool, maintain regular machine operation, and thereby improve the service life of the CNC honing machine.
